Open solution bottle. retain this reusable bottle for future use. (2) turn solution bottle into bubbles blather. always keep bubble blaster upright to minimize spills. do not place flat on the table. do not tilt beyond 90 degrees angle (3) pull trigger many times for 30 seconds to make light effect and streams of bubbles. internal cleaning instruction before and after each play, soak the feeding tubes in warm water for 5 minutes, then pull trigger many times for 2 minutes to allow the gun to self clean the inside. warm water prevent feeding tubes from clogging up. - directions: (1) open solution bottle. retain this reusable bottle for future use. (2) turn solution bottle into bubbles blather. always keep bubble blaster upright to minimize spills. do not place flat on the table. do not tilt beyond 90 degrees angle (3) pull trigger many times for 30 seconds to make light effect and streams of bubbles. internal cleaning instruction before and after each play, soak the feeding tubes in warm water for 5 minutes, then pull trigger many times for 2 minutes to allow the gun to self clean the inside. warm water prevent feeding tubes from clogging up.

Open solution bottle. retain this reusable bottle for future use. (2) turn solution bottle into bubbles blather. always keep bubble blaster upright to minimize spills. do not place flat on the table. do not tilt beyond 90 degrees angle (3) pull trigger many times for 30 seconds to make light effect and streams of bubbles. internal cleaning instruction before and after each play, soak the feeding tubes in warm water for 5 minutes, then pull trigger many times for 2 minutes to allow the gun to self clean the inside. warm water prevent feeding tubes from clogging up. - directions: (1) open solution bottle. retain this reusable bottle for future use. (2) turn solution bottle into bubbles blather. always keep bubble blaster upright to minimize spills. do not place flat on the table. do not tilt beyond 90 degrees angle (3) pull trigger many times for 30 seconds to make light effect and streams of bubbles. internal cleaning instruction before and after each play, soak the feeding tubes in warm water for 5 minutes, then pull trigger many times for 2 minutes to allow the gun to self clean the inside. warm water prevent feeding tubes from clogging up.