Spectracide Insect & Disease Control (16 fl oz)

Insect & Disease Control, Multi-Purpose Concentrate SPECTRUM BRANDS,

Insect & Disease Control, Multi-Purpose Concentrate SPECTRUM BRANDS,

Active Ingredients: Myclobutanil (0.78%), Permethrin (1.25%), Other Ingredients (97.97%)

Active Ingredients: Myclobutanil (0.78%), Permethrin (1.25%), Other Ingredients (97.97%)

Read all instructions inside before use. Mix with water. For outdoor residential use only. Push down & turn to open. Close tightly. Read all instructions inside before use. It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do not allow people or pets to contact treated areas until spray has dried. Do not water the treated area to the point of runoff. Do not make applications during rain. All outdoor applications must be limited to spot or crack-and- crevice treatments only, except for the following permitted uses: 1. Treatment to soil or vegetation around structures 2. Applications to lawns, turf and other vegetation. All outdoor applications to impervious surfaces such as sidewalks, driveways, patios, porches and structural surfaces (such as windows, doors and eaves) are limited to spot and crack-and-crevice applications only. Application is prohibited directly into sewers or drains, or to any area like a gutter where drainage to sewers, storm drains, water bodies or aquatic habitat can occur. Do not allow the product to enter any drain during or after application. Use Restrictions for Lawn and Ornamentals: Do not use treated plants, grass or clippings for food or feed. Not for use on turf or ornamental plants grown for sale or other commercial use, or for research purposes. Choose from one of the recommended application methods listed below. Pump-Up Style or Trigger Bottle Sprayer: 1. Fill with required amount of water. 2. Add the amount of concentrate specified. 3. Replace sprayer top and shake well before spraying. Dial-Style Hose-End Sprayer: 1. Set sprayer to the fl oz/gallon level specified. 2. Use only enough product for the area to be treated. 3. Close sprayer, attach to hose and apply. Concentrate Plus Water-Style Sprayer: 1. Determine the amount of concentrate required. 2. Pour concentrate into sprayer jar to the required fl oz level. 3. Then add the required amount of water to the gallon level. 4. Replace sprayer top on jar and shake well before spraying. General Use Tips: This product is highly effective when used to prevent diseases and damage from Insects or applied at the first sign of disease or insect damage. Consider treating early in the season. When using this product on plants not listed, test on a small area first. Rainproof - rain or watering two hours after application will not wash away effectiveness. If you need more information about lawn, ornamental and tree diseases, contact your local County extension Service. Handy Conversions: 1/2 fl oz = 1 Tbsp and 1 fl oz = 2 Tbsp. Food utensils such as measuring cups and spoons must not be used for food purposes after use in measuring pesticides. Roses, Flowers, Shrubs & Ornamental Trees: Insects Controlled: Aphids, bagworms, beetles (elm leaf, pine), budworms, cicadas, elm spanworms, exposed thrips, fall cankerworms, fall webworms, inchworms, leafminers, leafrollers, mealybugs, moths (pine, tussock), needle scales, oakworms, pine needleminers, spider mites and whiteflies. Diseases Controlled: Rose - Black spot, powdery mildew, rust (Treat Roses on a 7- to 10-day schedule. If Black spot is not a problem, use a 10- to 14-day schedule). Azalea Rhododendron - Petal blight (Ovulinia spp.), Powdery mildew (When treating Azaleas or Rhododendrons, begin spraying when flowers start to show color). Flowering Cherry, Honeysuckle, pivet, Trumpet Creeper, Zinnia - Cercospora Leaf Spot, Powdery Mildew. Ageratum, Aster, Birch, Chrysanthemum, Flowering Quince, Iris, Marigold, Ninebark - Rust (When treating Iris, increase use rate to 4 fl oz/gallon of water). Carnation, Mock Orange, Pansy, Petunia, Salvia, Snapdragon - Powdery mildew, Rust. Begonia, Elm, Maple, Poinsettia, Spirea - Powdery mildew. Flowering Almond - Blossom blight (Monilina spp.). Flowering Crabapple - Powdery mildew, Rust, Scab. Flowering Crabapple - Powdery Mildew, Rust, Scab. Douglas Fir - Needle rust (For Douglas Fir, Loblolly Pine and Slash Pine, use 3 fl oz/ gallon of water. Begin treating in early spring and continue treating every two to three weeks until threat of infection has passed). How to Treat: 1. Use 2 fl oz/gallon of water. 2. Apply to the point when spray just begins to run off the leaves. Treat once every 10 to 14 days throughout the season or until conditions favoring disease development (hot moist weather) are no longer present 3. Allow spray to dry for two hours before watering. Sensitive Plant Care: Use with care on Ferns, Palms and Fuchsia. As with all plants, especially Carnations, Chrysanthemums and Roses there exists a wide variety of species and. therefore a wide variety of susceptibility to injury. To test for plain sensitivity spray a few plants as described in the directions, wait 24 hours, and check for possible injury. Lawns - Insects Controlled: Ants, armyworms. brown dog ticks, chinch bugs, crickets cutworms, fleas, mole crickets and sod webworms. 1. Use 2 fl oz/gallon of water. 2. Apply to the point when spray just begins to run off the leaves. Treat once every 10 to 14 days throughout the season or until conditions favoring disease development (hot moist weather) are no longer present 3. Allow spray to dry for two hours before watering. Insects Controlled: Ants, armyworms, brown dog ticks, chinch bugs, crickets, cutworms, fleas, mole crickets and sod webworms. Diseases Controlled: Brown patch, Copper spot, Crown rot, Dollar spot, Leaf smuts, Leaf spot (including septoria, zonate), Melting out, Necrotic ring spot, Powdery mildew, Red thread, Rust, Spring dead spot and Summer patch. For lawn application in Nassau and Suffolk counties in New York State, do not apply more than three times per given year area per year. How to Treat: 1. For spot treatments, use 3-1/2 fl oz/gallon of water to treat 125 sq ft. 2. Start treating when grass begins to turn green in the spring or when signs of diseases are first noticed. 3. For best disease control, treat every 10 to 14 days. Do not apply more than 16 treatments per year. Use tip for Crown rot, use 3-1/2 fl oz/gallon of water to treat 65 sq ft. Storage and Disposal: Storage: Store in cool, dry place away from heat or open flame. Disposal: If empty: Nonrefillable container. Do not reuse or refill this container. Place in trash or offer for recycling if available. If partly filled: Call your local solid waste agency for disposal instructions. Never place unused product down any indoor or outdoor drain.

Read all instructions inside before use. Mix with water. For outdoor residential use only. Push down & turn to open. Close tightly. Read all instructions inside before use. It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do not allow people or pets to contact treated areas until spray has dried. Do not water the treated area to the point of runoff. Do not make applications during rain. All outdoor applications must be limited to spot or crack-and- crevice treatments only, except for the following permitted uses: 1. Treatment to soil or vegetation around structures 2. Applications to lawns, turf and other vegetation. All outdoor applications to impervious surfaces such as sidewalks, driveways, patios, porches and structural surfaces (such as windows, doors and eaves) are limited to spot and crack-and-crevice applications only. Application is prohibited directly into sewers or drains, or to any area like a gutter where drainage to sewers, storm drains, water bodies or aquatic habitat can occur. Do not allow the product to enter any drain during or after application. Use Restrictions for Lawn and Ornamentals: Do not use treated plants, grass or clippings for food or feed. Not for use on turf or ornamental plants grown for sale or other commercial use, or for research purposes. Choose from one of the recommended application methods listed below. Pump-Up Style or Trigger Bottle Sprayer: 1. Fill with required amount of water. 2. Add the amount of concentrate specified. 3. Replace sprayer top and shake well before spraying. Dial-Style Hose-End Sprayer: 1. Set sprayer to the fl oz/gallon level specified. 2. Use only enough product for the area to be treated. 3. Close sprayer, attach to hose and apply. Concentrate Plus Water-Style Sprayer: 1. Determine the amount of concentrate required. 2. Pour concentrate into sprayer jar to the required fl oz level. 3. Then add the required amount of water to the gallon level. 4. Replace sprayer top on jar and shake well before spraying. General Use Tips: This product is highly effective when used to prevent diseases and damage from Insects or applied at the first sign of disease or insect damage. Consider treating early in the season. When using this product on plants not listed, test on a small area first. Rainproof - rain or watering two hours after application will not wash away effectiveness. If you need more information about lawn, ornamental and tree diseases, contact your local County extension Service. Handy Conversions: 1/2 fl oz = 1 Tbsp and 1 fl oz = 2 Tbsp. Food utensils such as measuring cups and spoons must not be used for food purposes after use in measuring pesticides. Roses, Flowers, Shrubs & Ornamental Trees: Insects Controlled: Aphids, bagworms, beetles (elm leaf, pine), budworms, cicadas, elm spanworms, exposed thrips, fall cankerworms, fall webworms, inchworms, leafminers, leafrollers, mealybugs, moths (pine, tussock), needle scales, oakworms, pine needleminers, spider mites and whiteflies. Diseases Controlled: Rose - Black spot, powdery mildew, rust (Treat Roses on a 7- to 10-day schedule. If Black spot is not a problem, use a 10- to 14-day schedule). Azalea Rhododendron - Petal blight (Ovulinia spp.), Powdery mildew (When treating Azaleas or Rhododendrons, begin spraying when flowers start to show color). Flowering Cherry, Honeysuckle, pivet, Trumpet Creeper, Zinnia - Cercospora Leaf Spot, Powdery Mildew. Ageratum, Aster, Birch, Chrysanthemum, Flowering Quince, Iris, Marigold, Ninebark - Rust (When treating Iris, increase use rate to 4 fl oz/gallon of water). Carnation, Mock Orange, Pansy, Petunia, Salvia, Snapdragon - Powdery mildew, Rust. Begonia, Elm, Maple, Poinsettia, Spirea - Powdery mildew. Flowering Almond - Blossom blight (Monilina spp.). Flowering Crabapple - Powdery mildew, Rust, Scab. Flowering Crabapple - Powdery Mildew, Rust, Scab. Douglas Fir - Needle rust (For Douglas Fir, Loblolly Pine and Slash Pine, use 3 fl oz/ gallon of water. Begin treating in early spring and continue treating every two to three weeks until threat of infection has passed). How to Treat: 1. Use 2 fl oz/gallon of water. 2. Apply to the point when spray just begins to run off the leaves. Treat once every 10 to 14 days throughout the season or until conditions favoring disease development (hot moist weather) are no longer present 3. Allow spray to dry for two hours before watering. Sensitive Plant Care: Use with care on Ferns, Palms and Fuchsia. As with all plants, especially Carnations, Chrysanthemums and Roses there exists a wide variety of species and. therefore a wide variety of susceptibility to injury. To test for plain sensitivity spray a few plants as described in the directions, wait 24 hours, and check for possible injury. Lawns - Insects Controlled: Ants, armyworms. brown dog ticks, chinch bugs, crickets cutworms, fleas, mole crickets and sod webworms. 1. Use 2 fl oz/gallon of water. 2. Apply to the point when spray just begins to run off the leaves. Treat once every 10 to 14 days throughout the season or until conditions favoring disease development (hot moist weather) are no longer present 3. Allow spray to dry for two hours before watering. Insects Controlled: Ants, armyworms, brown dog ticks, chinch bugs, crickets, cutworms, fleas, mole crickets and sod webworms. Diseases Controlled: Brown patch, Copper spot, Crown rot, Dollar spot, Leaf smuts, Leaf spot (including septoria, zonate), Melting out, Necrotic ring spot, Powdery mildew, Red thread, Rust, Spring dead spot and Summer patch. For lawn application in Nassau and Suffolk counties in New York State, do not apply more than three times per given year area per year. How to Treat: 1. For spot treatments, use 3-1/2 fl oz/gallon of water to treat 125 sq ft. 2. Start treating when grass begins to turn green in the spring or when signs of diseases are first noticed. 3. For best disease control, treat every 10 to 14 days. Do not apply more than 16 treatments per year. Use tip for Crown rot, use 3-1/2 fl oz/gallon of water to treat 65 sq ft. Storage and Disposal: Storage: Store in cool, dry place away from heat or open flame. Disposal: If empty: Nonrefillable container. Do not reuse or refill this container. Place in trash or offer for recycling if available. If partly filled: Call your local solid waste agency for disposal instructions. Never place unused product down any indoor or outdoor drain.