Rit Dyemore Tropical Teal Synthetic Fiber Dye (7 fl oz)

Synthetic Fiber Dye, Tropical Teal • Nakoma Products LLC, • Packaging: Reusable

Synthetic Fiber Dye, Tropical Teal • Nakoma Products LLC, • Packaging: Reusable

Contains: None Additives: None

Contains: None Additives: None

Usage of instructions:Please Note: Color results vary by fabric type, amount of dye used and time in dye bath. Not recommended for fabrics with a rubber backing or labeled Cold Water Wash or Dry Clean Only. May not be effective on bleach damaged fabrics. If in doubt, test dye a swatch first. Must use on stove top to maintain high temperature. Preparation: Pre-wash fabric to remove any finishes or stains. For every pound of dry fabric (i.e. 2 adult large t-shirts), use 1/2 bottle (3.5 ozs.) of dye with 3 gallons of water. For polyester, double the dye quantity. Dye bath must have enough water for fabric to move freely. Directions: Shake well before using. Wear rubber gloves. Add hot water to a stainless steel pot. Heat water on stove to just below boiling. Ideally, water temperature for duration must be 200 degrees or greater. Maintain temperature for duration of dyeing. Add 1 teaspoon of liquid dish detergent. Add dye. Mix well. Submerge unfolded wet fabric into dye bath. Stir consistently for 30 minutes or until desired color is achieved (up to 60 min). Nylon dyes faster. Fabric will look darker when wet and prior to washing. Rinse in warm water and then gradually cool water until rinse water runs clear. Wash in warm water with mild detergent by hand or in your washing machine with an old towel. Use Rit ColorStay Dye Fixative immediately after dyeing blends containing cotton, linen, rayon or raime to maximize color retention. - Directions: Please Note: Color results vary by fabric type, amount of dye used and time in dye bath. Not recommended for fabrics with a rubber backing or labeled Cold Water Wash or Dry Clean Only. May not be effective on bleach damaged fabrics. If in doubt, test dye a swatch first. Must use on stove top to maintain high temperature. Preparation: Pre-wash fabric to remove any finishes or stains. For every pound of dry fabric (i.e. 2 adult large t-shirts), use 1/2 bottle (3.5 ozs.) of dye with 3 gallons of water. For polyester, double the dye quantity. Dye bath must have enough water for fabric to move freely. Directions: Shake well before using. Wear rubber gloves. Add hot water to a stainless steel pot. Heat water on stove to just below boiling. Ideally, water temperature for duration must be 200 degrees or greater. Maintain temperature for duration of dyeing. Add 1 teaspoon of liquid dish detergent. Add dye. Mix well. Submerge unfolded wet fabric into dye bath. Stir consistently for 30 minutes or until desired color is achieved (up to 60 min). Nylon dyes faster. Fabric will look darker when wet and prior to washing. Rinse in warm water and then gradually cool water until rinse water runs clear. Wash in warm water with mild detergent by hand or in your washing machine with an old towel. Use Rit ColorStay Dye Fixative immediately after dyeing blends containing cotton, linen, rayon or raime to maximize color retention.

Usage of instructions:Please Note: Color results vary by fabric type, amount of dye used and time in dye bath. Not recommended for fabrics with a rubber backing or labeled Cold Water Wash or Dry Clean Only. May not be effective on bleach damaged fabrics. If in doubt, test dye a swatch first. Must use on stove top to maintain high temperature. Preparation: Pre-wash fabric to remove any finishes or stains. For every pound of dry fabric (i.e. 2 adult large t-shirts), use 1/2 bottle (3.5 ozs.) of dye with 3 gallons of water. For polyester, double the dye quantity. Dye bath must have enough water for fabric to move freely. Directions: Shake well before using. Wear rubber gloves. Add hot water to a stainless steel pot. Heat water on stove to just below boiling. Ideally, water temperature for duration must be 200 degrees or greater. Maintain temperature for duration of dyeing. Add 1 teaspoon of liquid dish detergent. Add dye. Mix well. Submerge unfolded wet fabric into dye bath. Stir consistently for 30 minutes or until desired color is achieved (up to 60 min). Nylon dyes faster. Fabric will look darker when wet and prior to washing. Rinse in warm water and then gradually cool water until rinse water runs clear. Wash in warm water with mild detergent by hand or in your washing machine with an old towel. Use Rit ColorStay Dye Fixative immediately after dyeing blends containing cotton, linen, rayon or raime to maximize color retention. - Directions: Please Note: Color results vary by fabric type, amount of dye used and time in dye bath. Not recommended for fabrics with a rubber backing or labeled Cold Water Wash or Dry Clean Only. May not be effective on bleach damaged fabrics. If in doubt, test dye a swatch first. Must use on stove top to maintain high temperature. Preparation: Pre-wash fabric to remove any finishes or stains. For every pound of dry fabric (i.e. 2 adult large t-shirts), use 1/2 bottle (3.5 ozs.) of dye with 3 gallons of water. For polyester, double the dye quantity. Dye bath must have enough water for fabric to move freely. Directions: Shake well before using. Wear rubber gloves. Add hot water to a stainless steel pot. Heat water on stove to just below boiling. Ideally, water temperature for duration must be 200 degrees or greater. Maintain temperature for duration of dyeing. Add 1 teaspoon of liquid dish detergent. Add dye. Mix well. Submerge unfolded wet fabric into dye bath. Stir consistently for 30 minutes or until desired color is achieved (up to 60 min). Nylon dyes faster. Fabric will look darker when wet and prior to washing. Rinse in warm water and then gradually cool water until rinse water runs clear. Wash in warm water with mild detergent by hand or in your washing machine with an old towel. Use Rit ColorStay Dye Fixative immediately after dyeing blends containing cotton, linen, rayon or raime to maximize color retention.